Battery Replacement
The NoTouch Thermometer includes one 3V Lithium battery, already installed. Approximate battery life is five years. If the “Low Battery” symbol is displayed on the thermometer’s LCD panel or the thermometer does not function at all, immediately; replace the battery as follows:
- Pull the battery cover straight back and up to remove it.
- Remove the old battery by gently pushing aside the tiny brass lever hugging the battery. This will enable the battery to become detached and pop out.
- Insert the new battery with the positive (+) side up and the negative (-) side pointed down
- Slide new battery into the battery holder ensuring that it is positioned under the tiny brass lever. Push the battery down gently until a “click” is heard.
- Replace battery cover.
Caution: Replace only with the following battery types:
Mitsubishi CR 2032
Renata CR 2032
Energizer CR 2032
Varta CR 2032
Ever-ady / Ucar CR 2032
Toshiba CR 2032 ~~
The use of other types of batteries may present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Do not recharge, disassemble, heat above 100°C, or incinerate. Used batteries should be disposed of properly.
